MX-FX11 FAX SOFTWARE SWITCH 2 – 14
91 7 Internet FAX Setting of Enable/
Disable of the
threshold value of the
internet FAX Mexican
legal, foolscap
Setting to change the print paper judgment.
When Mexican legal is received, if the automatic reduction is made, it may be
printed in foolscap because of the small threshold value. When Enable,
Mexican legal can be selected easily.
"0": Enable
"1": Disable
Setting of FAX received data is performed by means of a separate SW.
8 Internet FAX Setting of Enable/
Disable of the
threshold value of the
internet FAX Mexican
legal, legal
Setting to change the print paper judgment.
When Legal is received, if the automatic reduction is made, it may be printed in
Mexican legal because of the small threshold value. When Enable, Legal can
be selected easily.
"0": Enable
"1": Disable
Setting of FAX received data is performed by means of a separate SW.
92 1 Internet FAX Setting of text printing
when receiving mails
without attached files
Setting to determine whether or not to print mail texts when incoming mails do
not have attached files.
"0": Do not print mail letters
"1": Print the main text of mails
(Communication results error)
2 Internet FAX Report output (when
reception is refused)
<Internet FAX only>
Setting to determine whether or not to output the communication results sheet
when reception is refused in Internet FAX reception. However, other than not
printing is set by means of the report output (when receiving Internet FAX)
setting.
"0": Do not output
"1": Output
FAX is set at "Report output (when reception is refused) <FAX only>."
Irrespective of "Always print" and "Error," the results sheet is not printed.
3 Scanner Display setting at times
of NW trouble
Setting to determine whether or not to display on the operation panel when
network trouble occurs while the NIC card is loaded.
"0": Display trouble
"1": Do not display trouble (do not display "CE-00" and "CE-01")
4 Internet FAX Nighttime FAX mode
setting <when Internet
FAX product key is
disabled>
Setting to determine whether or not to enter the minimum power consumption
mode when the panel power SW is turned OFF.
Enable only when the internet FAX product key is disable.
"0": Enter the nighttime FAX mode
"1": Do not enter the nighttime FAX mode
This soft SW is disable (does not function) when the external calculation mode
is enable.
(SW63-6: Pseudo-nighttime mode setting <External calculation mode>
functions.)
5 Internet FAX Pseudo-nighttime
mode setting <when
Internet FAX product
key is enabled>
Setting to determine whether or not to enter the minimum power consumption
mode when the panel power SW is turned OFF.
Enable only when the internet FAX product key is enable.
"0": Enter the pseudo-nighttime FAX mode (do not enter the nighttime mode)
"1": Do not enter the pseudo-nighttime FAX mode (enter the nighttime mode)
This soft SW is disable (does not function) when the external calculation mode
is enable.
(SW63-6: Pseudo-nighttime mode setting <External calculation mode>
functions.)
*3
6 OSA Pseudo-nighttime
mode setting <External
calculation mode>
Setting to determine whether the minimum low power consumption mode is set
when the panel power switched is turned OFF in the OSA external calculation
mode.
"0": Enter the pseudo-nighttime FAX mode (do not enter the nighttime mode)
"1": Do not enter the pseudo-nighttime FAX mode (enter the nighttime mode)
Enable only when the external calculation mode is ON.
In the external calculation mode, the following soft switches are disable (do not
function).
SW63-4: Nighttime FAX mode setting <When the internet FAX product key is
disable>
SW63-5: Pseudo-nighttime FAX mode setting <When the internet FAX product
key is enable>
7 Function Nighttime FAX mode
setting <60W nighttime
mode>
Setting to determine whether the FAX BOX power is not shut down when the
panel power switch is turned OFF (In normal cases, it is notified in the F net,
dial-in setting.)
"0": Do not enter the pseudo-nighttime FAX mode (60W is not notified)
"1": Enter the pseudo-nighttime FAX mode (60W is notified)
Related soft SW:
SW63-4: Nighttime FAX mode setting
<when Internet FAX reception is disabled>
SW63-5: Pseudo-nighttime mode setting
<when Internet FAX reception is enabled>
SW63-6: Pseudo-nighttime mode setting
<External calculation mode>
This soft SW is enable regardless of the external calculation mode.
SW
No.
Bit
No.
Item SW selection and function System settings
To Next Page
Loading...
