MX-FX11 FAX SOFTWARE SWITCH 2 – 13
Others
SW
No.
Bit
No.
Item SW selection and function System settings
90 1 Internet FAX Addition of Content-X-
CIAJWNETFAX field
(in internet FAX send)
Setting to determine whether or not "CONtent-X-CIAJWNETFAX" is added to
the mail field in Internet FAX send. By adding this field, printing of the mail text
on the Internet FAX receiving side can be inhibited (however, this function is
only valid when the Internet FAX receiving side supports this field).
"0": Do not add field
"1": Add IGNORE
2 Internet FAX Resolution type of
internet FAX
This sets the type of reading resolution when sending Internet FAX.
"0": inch type
"1": mm type
3 Scanner Setting of E-Mail
sending (Return
address)
Setting to determine whether the return address is added or not when the mail
content is modified in returning Scan to E-Mail.
"0": Return address is not added.
"1": Return address is added.
4 Scanner Setting of E-Mail
sending (Header)
Setting to determine whether the device name, the model name, and the
installing place are added to the header or not when the mail content is
modified in returning Scan to E-Mail.
"0": The header is not added.
"1": The header is added.
5 Internet FAX Setting of internet FAX
sending (Return
address)
Setting to determine whether the return address is added or not when the mail
content is modified in returning internet FAX.
"0": Return address is not added.
"1": Return address is added.
6 Internet FAX Setting of internet FAX
sending (Header)
Setting to determine whether the device name, the model name, and the
installing place are added to the header or not when the internet FAX mail
content is modified.
"0": The header is not added.
"1": The header is added.
7 Internet FAX Selection of the
Internet FAX date and
transmission source
print language
<format>
Setting to determine the format of the date and transmission source attached
when transmitting Internet FAX.
"0": Date format
"1": North American format
8 Scanner File name replacement
setting (ScanToXXX)
(Line break prohibit)
Setting to determine whether the codes registered in the US-ASCll are replaced
with "_" or not for the file name in ScanToXXX and the file name used as a link
destination of a hyper link mail.
"0": Not replaced
"1": Replaced (Replaced with "_")
91 1 Scanner Setting of attaching
"\ (back slash)" to a
common folder name
or a file name in
ScanToSMB.
Setting to determine whether "\ (back slash)" is attached to the head of a file
name or not.
"0": Not attached (When this setting is selected, the file name is as "common
folder name\file name.")
"1": Attached (When this setting is selected, the file name is as "common folder
name\\file name.")
2 Scanner Secondary storage
background process
inhibit in scanner send
(other than USB)
Setting to determine whether the secondary storage process in ScanToXXX is
performed in the background or in the foreground with "Processing" displayed
on the operation panel.
"0": Enable (Background process)
"1": Inhibit (Foreground process)
3 Scanner Secondary storage
background process
when the send data
upper limit setting is
valid
Setting to determine whether the secondary storage process in ScanToXXX
(except for ScanToUSB) when the send data upper limit setting is valid is
performed in the background or in the foreground with "Processing" displayed
on the operation panel.
"0": Disable (Foreground process)
"1": Enable (Background process)
When the soft SW62-2 "Secondary storage background process inhibit in
scanner send (other than USB)" is set to "1: Inhibit," the process is made in the
foreground regardless of this setting.
4, 5 Internet FAX Setting of size
selection in the internet
FAX reception (AB
series)
The paper sizes which can be selected in the paper selection of the internet
FAX reception are set.
Since, in the paper selection for the internet FAX reception, only one paper size
can be selected according to the received data width and the number of lines, a
user who does not use B5 paper (does not load B5 paper in the cassette)
cannot print until B5 paper is loaded. To avoid this inconvenience, the use can
use this setting for the paper size prepared in the cassette.
"00": Selection from B5/A4/B4/A3
"01": Selection from A4/B4/A3
"10": Selection from A4/A3
"11": Selection from A5/B5/A4/B4/A3
6 Internet FAX Valid/Invalid setting of
Internet FAX A4, 8.5 x
11 threshold
When printing received Internet FAX data with A4 and 8.5 x 11 paper in the tray,
this setting determines whether to make threshold values in paper selection
valid or invalid.
"0": Valid
"1": Invalid
Setting of FAX received data is performed by means of a separate SW.
To Next Page
Loading...
