The following pages contain information regarding test simulations. For a detailed description for each
test simulation, please refer to the MX-M904/1054/1204 Service Manual.
Simulation Entry Method:
1. Double-click the [HOME] key. (Total use quantity/Toner remaining quantity display mode screen
will appear):-
2. Touch the VER display section (as indicated below):-
3.
Touch keys:-
4. Enter a main SIM code with the 10-key pad then touch the START key or select a main code from
the SIM key list on the touch panel.
To Next Page
Loading...
Need help?
General
