Sharp MX-M160D User Manual

MX-M200D DISASSEMBLY AND ASSEMBLY 11-6
F.Separation pawl
G.Lower heat roller
Assembly: When assembling the fusing front paper guide (3),
temporarily fix the paper guide fixing plate with the screw
so that the paper guide fixing plate (2) is in contact with the
fusing lower frame bottom (A).
For Taiwan:
Align the edge (B) of the fusing front paper guide (3) and
the top (C) of the rib on a line, and tighten the screw firmly.
Except for Taiwan:
Lower the fusing front paper guide to the bottom of the
adjustment width, and tighten the screw firmly.
H.Separation pawl
4.Paper exit section
A.Ozone filter
(2)
(2)
(1)
(3)
(3)
(1)
(1)
(3)
(2)
(2)
(A)
(4)
Grease
(JFE552)
(C)
(B)
For Taiwan
Except for
Taiwan
No. Content
A Ozone filter
B Cooling fan
C Paper exit unit
D Paper exit sensor / duplex sensor
E Transport roller
F Paper exit roller
G Paper exit interface PWB
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(2)
(2)

Sharp MX-M160D Specifications

General

Brand	Sharp
Model	MX-M160D
Category	All in One Printer
Language	English