TROUBLESHOOTING
28
CONTENTS
Improper printing operation
(part 1)
Printing is slow
■ Simultaneous use of two or more application
software programs?
Start printing after quitting all unused application software
programs.
Two-sided printing is not possible
■
Is two-sided printing disabled in the system settings
(administrator)?
Enable two-sided printing as explained in "DISABLING OF
DUPLEX" in the "SYSTEM SETTINGS (ADMINISTRATOR)"
in the operation manual.
Stapling is not possible (when a finisher
is installed)
■ Is stapling disabled in the system settings
(administrator)?
Enable stapling in the system settings (administrator) (see
"DISABLING OF STAPLER" in the "SYSTEM SETTINGS
(ADMINISTRATOR)" in the operation manual).
■ Did you attempt to print more pages than can be
stapled?
When a finisher is installed, up to 50 sheets can be stapled.
(up to 30 sheets when the paper size is B4, Foolscap, or
larger).
■ Are pages of different width mixed together in the
print job?
Stapling is not possible when pages of different width are
mixed together in a print job.
To Next Page
Loading...
