SPECIFICATIONS
32
CONTENTS
Printer specifications
* The factory default setting for memory used for the printer function is 16 MB. The proportion of memory allocated to the printer
function can be changed in the system settings (administrator). See "MEMORY FOR PRINTER" in the "SYSTEM SETTINGS
(ADMINISTRATOR)" in the operation manual.
Printing speed
MX-M260: 26 pages/min.
MX-M310: 31 pages/min.
Resolution 600 dpi
Memory 32 MB*
Additional memory slots
2 slots (maximum of 1024 MB of additional memory modules (168-pin SDRAM DIMM) can be installed)
Interface USB 2.0 (Full-Speed) interface
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Note
To Next Page
Loading...
