Sharp MX-M266N

SHARP
SENSOR & SWITCH LOCATION
41
INNER FINISHER
Code
Name
Function operation
FAPHPS-F
Paper alignment plate home position
sensor F
Detects the home position of the paper alignment plate
on the front side.
FAPHPS-R
Paper alignment plate home position
sensor R
Detects the home position of the paper alignment plate
on the rear side.
FDRPS
Delivery roller position sensor
Detects that the delivery roller is in the home position.
FDTLLS
Delivery tray lower limit sensor
Detects the lower limit position of the paper delivery tray.
FDTPD
Paper delivery tray paper detector
Paper on the paper delivery tray is detected.
FPLD
Paper level detector
Detects the paper height position of the paper
delivery tray (movable section).
FPLS
Paper level sensor
Detects the paper height position of the paper
delivery tray (movable section) during a staple job.
FPPD1
Paper pass detector
Detects paper entry in the finisher.
FPRD
Paper rear edge detector
Detects that the rear edge of paper transported to the compiler
reaches the rear edge of the compiler.
FSTPD
Staple tray paper detector
Detects paper presence in the staple compiler.
FTPS
Delivery tray position sensor
Detects the intermediate position of the paper
delivery tray.