SCANNER
47
SCANNING AN ORIGINAL
The basic operation for scanning is explained below.
The procedure for sending a scanned file by E-mail to a destination stored in the address book is explained here.
1
Press the [Home Screen] key.
Home screen appears.
2
Tap the [Easy Scan] mode icon.
Easy Scan mode screen appears.
3
Place the original.
Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.
► PLACING ORIGINALS
(page 14)
4
Tap the [Address Book] key.
5
Tap the key of the desired destination.
Addresses of the current mode are selected from addresses
whose checkboxes were selected when the tapped
destination was registered. If no addresses were registered
with the checkbox selected, tap the [Yes] key in the
confirmation screen and select the desired addresses.
To add another destination, tap the key of the destination.
Easy
Copy
Easy
Scan
Tray
Settings
Operation
Guide
Enlarge
Display Mode
Settings
Total Count
Brightness
Adjustment
Job Status
Toner Quantity Bk
10:15
CLOUD PORTAL
Address Book Sending History
Global
Address Search
Scan to HDD/
USB
CA
Preview Auto Set
Original
A4
Address E-mail Address
Detail
B/W
Start
Colour
Start
To Next Page
Loading...
Need help?
General
