BEFORE USING THE MACHINE
9
(1) Finisher (100-sheet stapling)*
This staples and outputs paper.
(2) Saddle stitch finisher (100-sheet stapling)*
This staples and folds paper.
(3) Inserter*
Covers and insertion sheets to be inserted into printed sheets
can be loaded.
Using the manual finishing function, you can directly feed paper
into the finisher or saddle stitch finisher to staple, punch or fold
the paper.
(4) Bypass tray*
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" × 11"R, pull out
the extension guide.
(5) Saddle stitch finisher (50-sheet stapling)*
This staples and folds paper.
(6) Finisher (50-sheet stapling)*
This staples and outputs paper.
(7) Trimming module*
This trims the excess of saddle-stitched output.
(8) Punch module*
This punches and outputs paper.
(9) Folding unit*
This folds and outputs paper.
(10) Large capacity trays*
Store paper in this tray. Up to 2500 sheets can be stored in each
tray.
* Peripheral device. For more information, see the User's Manual.
(3) (4)
(9) (10)(7) (8)(6)(5)
(2)
(1)
To Next Page
Loading...
Need help?
General
