Sharp PN-E702 User Manual

9
E
Supplied Components
If any component should be missing, please contact your dealer.

LiquidCrystalDisplayMonitor:1

Remotecontrolunit:1

Cableclamp:2

Powercord:1

R-6battery(“AA”size):2

CD-ROM(UtilityDiskforWindows):1

SetupManual:1

Verticalsticker(Operationpanel):1

Verticalsticker(Logo):1

Terminallabel:1
UsedwheninstallingtheexpansionboardPN-ZB01(optional).

CoverSharplogo:1
Place this sticker onto the SHARP logo to cover the logo.
* SharpCorporationholdsauthorshiprightstotheUtilityDiskprogram.Donotreproduceitwithoutpermission.
* Forenvironmentalprotection!
 Donotdisposeofbatteriesinhouseholdwaste.Followthedisposalinstructionsforyourarea.
Contents
IMPORTANT INFORMATION ............................................3
DEAR SHARP CUSTOMER ..............................................5
SAFETY PRECAUTIONS ..................................................5
TIPS AND SAFETY INSTRUCTIONS ...............................7
MOUNTING PRECAUTIONS ............................................8
Supplied Components .....................................................9
Part Names .....................................................................10
Connecting Peripheral Equipment ...............................12
ConnectionwithaPCorAVequipment .....................12
ConnectionwhenthePN-ZB01(optional)
is attached ..................................................................13
Connecting the Power Cord .........................................14
Binding Cables ...............................................................14
Removing the Handles ..................................................14
Preparing the Remote Control Unit ..............................15
Installing the batteries ................................................15
Remote control operation range .................................15
Turning Power On/Off ....................................................16
Turning on the main power.........................................16
Turning power on/off ..................................................16
Disablingpoweron/offoperations ..............................17
Basic Operation .............................................................18
Menu Items .....................................................................20
Displayingthemenuscreen .......................................20
Menu item details .......................................................21
AdjustmentsforPCscreendisplay ............................28
Initialization (Reset)/Functional Restriction Setting
(FUNCTION) ....................................................................29
Controlling the Monitor with a PC (RS-232C) ..............30
PCconnection ............................................................30
Communicationconditions .........................................30
Communicationprocedure .........................................30
SettingoftheGAMMAuserdata ................................33
RS-232Ccommandtable ...........................................34
Controlling the Monitor with a PC (LAN) .....................42
Settings to connect to a LAN ......................................42
ControllingwithaPC ..................................................44
Troubleshooting .............................................................50
Specications ...............................................................52
Mounting Precautions
(For SHARP dealers and service engineers) ...............56

Sharp PN-E702 Specifications

General

3D	No
Pixel pitch	0.802 x 0.802 mm
Aspect ratio	16:9
Response time	6 ms
Display diagonal	70 \
Separate H/V sync	Yes
Supported video modes	1080p
Viewable size, vertical	865.6 mm
Contrast ratio (dynamic)	-
Contrast ratio (typical)	4000:1
Display number of colors	1.073 billion colors
Viewable size, horizontal	1538.9 mm
Viewing angle, horizontal	176 °
Display brightness (typical)	450 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Audio system	stereo
Analog signal format system	NTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, SECAM
RS-232 ports	2
DVI-D ports quantity	0
Product color	Black
Panel mounting interface	200 x 200, 400 x 200 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	240 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth (without stand)	100 mm
Width (without stand)	1615 mm
Height (without stand)	947 mm
Weight (without stand)	50000 g