To Next Page

To Previous Page

Installing the batteries

1. Place your nger on the part marked with the ▲, and then pull the cover off.

2. See the instructions in the compartment and put in the supplied batteries (R03 (“AAA” size) x 2) with their plus (+)

and minus (-) sides oriented correctly.

3. Close the cover.

TIPS

• Whenthebatteriesbecomeexhausted,replacethemwithnew(commerciallyavailable)batteries.

• Thesuppliedbatteriesmaybecomeexhaustedquicklydependingonhowtheyarestored.

• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.

• Usemanganeseoralkalinebatteriesonly.

Remote control operation range

Remote control sensor in

Theremotecontrolcanbeoperatedevenwhentheremotecontrolsensorisstoredinsidethemonitor.

Pointtheremotecontrolunittowardtheremotecontrolsensoronthebottomofthemonitor(ortherightsideofthemonitorif

usingportraitorientation).

For the monitor in landscape orientation For the monitor in portrait orientation

9.8 feet (3m)

9.8 feet

(3m)

9.8 feet

(3m)

Remote control

sensor

Remote control

sensor

20º

10º

10º10º

10º

9.8 feet

(3m)

10 º

Preparing the Remote Control Unit

Sharp PN-M401 Operation Manual

Other manuals for Sharp PN-M401