34
E
Initialization (Reset)/Functional Restriction Setting (FUNCTION)
POWER BUTTON
Normally, leave this setting as MONITOR.
When using an optional part, if instruction appears,
change the setting accordingly.
EXTERNAL CONTROLLER INPUT
Normally, you do not need to change this setting.
When using an optional part, if instruction appears,
change the setting accordingly.
APPLICATION REBOOT
The Android system of APPLICATION mode restarts.
UPDATE MAIN SOFTWARE
Not normally used.
Used by service technicians when performing repairs or
otherwise.
OPTION
Set whether or not the expansion slot is used.
3. Press the RETURN button to return to the normal
screen.
TIPS
• When both abnormal temperature and hardware error are
detected, the hardware error notication overrides.
• If TEMPERATURE ALERT or STATUS ALERT is set to
OSD & LED, alert messages will appear even if the OSD
DISPLAY is set to ON 2 or OFF.
• If TEMPERATURE ALERT or STATUS ALERT is set to
LED or OSD & LED, the power LED lights even if the LED
function is set to OFF.
To Next Page
Loading...
Need help?
General
