Sharp PN-V601 - Controlling target PC power

113
Status Monitoring Tool
●Setting panels for which status will not be obtained
Itispossibletosetpanelsforwhichstatuswillnotbeacquiredsothattheywillnotbedisplayedinthepanellist.
1. From the [Option] menu click [Panel setting without status acquisition].
2. Select panels from the “Panel list with getting status”.
3. Click [Add].
Theselectedpanelswillmovetothe“Panellistwithout
gettingstatus”.
4. Click [OK].
 Toresetapanelsothatitsstatuswillbeacquired,
selectitfromthe“Panellistwithoutgettingstatus”,
andclick[Remove].
●Controlling target PC power
ThetargetPCcanbeturnedonandoff,andrestarted.
1. Select a group from the group tree, and then select a
panel from the panel list.
2. To turn the target PC on, from the [Panel] menu, click [Power control of controller PC] and then
[Power on], or alternatively, click
.
To restart the target PC, from the [Panel] menu, click [Power control of controller PC] and then
[Reboot], or alternatively, click
.
To turn the target PC off, from the [Panel] menu, click [Power control of controller PC] and then
[Power off], or alternatively, click
.
Aconfirmationdialogboxwillappear.
3. Click [Yes].
Theprocesswillbeexecuted.
Acquiring and displaying panel status