Sharp PN-V601 - Adding Default Panel Settings for Panels

83
Panel Management and Option
●Adding default panel settings for panels
SetdefaultvaluesforFTPsettingsthatareappliedtoallnewly-addedpanels.
1. Click the [FTP Setting] tab.
2. Set the [Default to Add the Panel].
•Username(within30alphanumericcharacters)
•Password(within30alphanumericcharacters)
•Portnumber(1-32000)
The initial default values are:
•Username:ftp
•Password:ftp
•Portnumber:21
 •IfyouhaveinstalledtheViewerVersion,auniqueFTPServerwillbeinstalled,andstartedasaservice.
ThedefaultTCP/IPportnumbersare20and21.Ifthisportnumberisalreadyusedbyanotherservice,
changetheportnumber.TheFTPsettingsofthetargetPCClientSchedulermustusethesameport
number. (
F
p.101)
•Theportnumbershouldalsobechangediftherearesecurityissues.
Option