Sharp PN-V601 - Adding;Editing a Panel

79
Panel Management and Option
2) Buttons
The buttons perform the following actions:
Name Description Relevant page
Add Panel Adds a new panel to be managed.
F
Below
AddGroup Adds a new group.
F
p.80
Edit Changesthecontentoftheselectedpanelorgroup.
F
Below,p.80
Delete Deletes the selected panel or group.
F
p.81
ManualControl Sets panels and control commands to be controlled manually.
F
p.81
Exit Closesthe[PanelManagement]window. -
●Adding/editing a panel
1. Click [Add Panel] to add a new panel to manage.
The[AddPanel(PanelPC)]dialogboxwillappear.
Click [Edit] to edit an existing panel.
The[EditPanel(PanelPC)]dialogboxwillappear.
 Thesettingsforthe[AddPanel(PanelPC)]and[EditPanel(PanelPC)]dialogboxesarethe
same. Panels can also be edited after they have been added.
2. Set the options.
1) Panelname(Compulsory)
 Chooseanamethatwillmakeiteasytoidentifythe
panel.(Namesmustbewithin50characters)
2) Group
 IntheGroupbox,selectagrouptoaddthepanelto.
If you do not want to assign the panel to any particular
group,select“(none)”.Panelsthatarenotassignedto
anyparticulargroupwillbeaddedunder“AllPanels”.
 Clicking[AddPanel]whilethe“Listofregistered
panel”treegrouporapanelassignedtoagroupis
selected will add the panel to the respective group.
3) HostnameorIPaddress(Compulsory)
 SetsthehostnameorIPaddressoftargetPCwhichcanbeaccessedfromtheserver.
It is not possible to create two or more panels with the same host name or IP address.
Managing panels