Sharp PN-V601 - Page 32

32
Program Editor
4. Set [Frame Layout].
1) Checkthecheckboxesbesidetheframes,scroll
messages, or PIP that you want to display.
 Youcanalsoclickthe button at the top right
hand corner of a frame or scroll message to hide it.
2) Set“X”,“Y”,“Width”,and“Height”coordinatesforeach
frame or scroll message.
 •Only“X”and“Y”coordinatescanbeadjustedfor
thePIPframe.ToadjustthesizeofthePIPframe,
clickthe[PinP]tab,andspecifya“Value”forthe
“Size”under“Key”.
•Clickonaframeorascrollmessagetoselectit.
Eightresizehandleswillappeararoundtheborder
of the frame. By dragging these handles with the
mouse,youcanresizeaframeorscrollmessage,
andconfirmchangesvisually.
The frame and scroll messages can be moved by
dragginganareaotherthantheresizehandleusing
the mouse.
· Draggingwhileholdingdown[Shift]allowsyoutoresizeaframewhilekeepingthesameaspect
ratio.
· Youcanalsomoveframesorscrollmessagesusingthearrowkeys.
·
Youwillstillbeabletoadjustthesizeofaframeifyouholddown[Shift]whileusingthearrowkeys.
 •Youcanmoveorresizeitemsaccuratelybyaligningthemwiththegrid.(
F
p.33)
E.g.
Frame1: X=25, Y=20, Width=1338, Height=835
Frame2: X=1380, Y=25, Width=523,  Height=830
Message1: X=20, Y=869, Width=1883, Height=194
PIP: X=576, Y=395
The above coordinates would produce a layout like the screenshot below.
 •Thename,positionanddimensions
(Xcoordinateoftopleftcorner,
Ycoordinateoftopleftcorner,width,
height) are displayed in the top left of
each frame or scroll message.
•ThePIPframecannotbemovedin1pt
increments.Locationswhereitemscan
be positioned depend on the kind of
LCDmonitorused.
Creating programs