Sharp PN-V601 - Page 35

35
Program Editor
[Viewer Path] tab
Displaysthecontentfilespecifiedwith“FilePathOnViewerPC.”You
canspecifyanEXEfile.Enterapaththatcanbereferencedbythe
targetPC.ForanEXEfile,“Parameters”canbeadded.
 •Whendisplayinglargecontentfilesthatarenotfrequentlyupdated,savethefilesonthetargetPC
in advance, and only enter the paths that refer to them. This will help reduce the time it takes to
send program contents.
•SpecifytheabsolutepathofthetargetPCortherelativepathfromMyContentsfolder(
F
p.100).
•Thefollowingparameterscanbeused:
 %L: Xcoordinateoftopleftcornerofframe
 %T: Ycoordinateoftopleftcornerofframe
%W : Width of frame
%H : Height of frame
•Thissoftwareonlylaunchesorclosesspecifiedexecutablefilesataspecifiedtime.Itdoesnot
guaranteetheactionsofanyexecutablefilesitlaunches.
•Dependingonthespecificationsofthefilethatisexecuted,itmaynotbeabletolaunchorclose
correctly, or it may not be able to display windows in the correct position.
3. Select the content you want to use from the “Content
File” list.
Refertop.30foralistoffiletypesthatcanbeusedwiththe
backgroundandframes1-4.
 •Clickwhileholdingdown[Ctrl]or[Shift]toselect
multiplecontentfilesatthesametime.
•Youcanpreviewcontentfilesinthe[Content
Preview]window.(
F
p.36)
•IfusingHTMLcontent,makesurethatimages,
moviesandotherfilesreferredtointheHTML
 codearetransferredtothesamelocation,orasubdirectoryofthesamelocation,wheretheHTML
fileitselfisstored(attachedfiles).Thesecanbeaddedfromcontentfileproperties.(
F
p.37)
 MakesurethatallattachedfilesaredefinedbytheirrelativepathsintheHTMLfile.
4. Click .
Contentfilesareaddedtotheendoftheplaylist.
Formoredetailsabouttheplaylistrefertop.36.
 •Instep3,youcanalsoregistercontentfilesby
double-clicking them, or dragging them from the
“ContentFile”listtothe“Playlist”.
•Thecontentfilesintheplaylistcanbecopiedbydragginganddroppingthemwhileholdingdown
the[Ctrl]key.
5. Repeat steps 1 to 4 as necessary. You can set the other frames in the same manner.
By clicking the ( )button“addblankcontent”atthebottomofthe“ContentFile”listonthe
[Frame1]-[Frame4]tabs,youcanaddahiddensectiontotheplaylist.Likeothercontentfiles,the
duration and order of play can be set for hidden sections. The frame set in the hidden section is
not displayed.
Creating programs