Sharp PN-V601 - Page 93

93
Schedule Distribution Tool
4. Set the “Display Time of Break-in Program” area.
• “Displaythebreak-inprogramassoonasdistributionhas
beencompleted”optionbutton
 Displaystheprogramassoonasthedistributionwizard
exits.
• “Startthebreak-inprogramatthetimespecified”option
button
Starts program display at the set time.
5. Set a “Display Time”
6. If you want to perform panel control operations before and after a break-in program, check the
“Conduct panel control before and after the program display” check box, and click [Next].
The[SpecificationofPanelControlCommand]dialogboxwillappear.
If you do not want to perform panel control operations before and after a break-in program, clear the
“Conduct panel control before and after the program display” check box, and click [Next].
A[Confirmation]dialogboxwillappear.Proceedtostep9.
7. Set the [Panel Control Command].
“BeforeDisplaytheBreak-inProgram”
• “PowerONthepanelbeforedisplaytheprogram”checkbox
Turns the panel on before displaying the break-in program.
 *ItcannotbeusedwiththeLB-46GX35andLB-52GX35.
• “Switchthepanelinputbeforedisplaytheprogramas
below”checkbox
 Switchestothespecifiedinputbeforedisplayingthe
break-in program.
“AfterDisplaytheBreak-inProgram”
• “PowerOFFthepanelafterdisplaytheprogram”checkbox
 Turnsthepaneloffafterthebreak-inprogramhasfinished.
• “Switchthepanelinputafterdisplaytheprogramasbelow”checkbox
 Switchestothespecifiedinputafterdisplayingthebreak-inprogram.
8. Click [Next].
A[Confirmation]dialogboxwillappear.
9. Check the distribution settings, and click [Finish].
The break-in program display or display reservation will be
executed.
By packaging distribution data, program information
containing break-in programs and other contents
canbesavedasasinglefile.
Click[SavethePackage],andinthe[Savethe
Package]dialogboxthatappears,specifya
directorytosavethefileto.Thenentera“File
name”,andclick[Save].Thereisusuallynoneedto
use this function.
Displaying break-in programs