Sharp RP-32 Series - Specifications; Type and Technical Details; Tonearm and Cartridge Information; Physical Dimensions and Weight

Type:
Semiconductor:
Speed:
Motor:
Wow and flutter:
S/N ratio:
output:
Frequency response:
Tracking force:
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT,
PLEASE REFER TO THE OPERATION MANUAL.
Direct drive, semi-automatic
8 Transistors
2 Diodes
3 Hall Ellements
33-l/3 and 45 rpm
DC Servo Motor
50.08% (DIN 45 500)
65 dB (DIN B)
3 mV (1 kHz, 50 mm/set)
20 - 20,000 Hz
2.5 g (recommended)
1. 17 cm (7”) EP Record Adaptor
2. Center Spindle
3. Turntable Sheet
4. Turntable
5. Tonearm
6. Tonearm Counterbalance Weight
7. Cue Lever
8. Cartridge
9. Cut Button: Cut
10. Speed Selector Button: SPEED
11. Input/Output Plug
SPECIFICATIONS
Tonearm:
Static balanced
Cartridge:
Magnetic type (CART-137)
Replacement stylus:
STY- 137
Dimensions: Width; 430 mm (17”)
Height; 108 mm (4-l/4”)
Depth; 367 mm (14-7/16”)
Weight:
2.5 kg (5.5 Ibs)
Specifications for this model are subject to change
without prior notice.
NAMES OF PARTS
Figure 2-l
Figure 2-2
-2-