3. Remove the size block upward, and fit to the suitable
paper size.
Caution
• When the tray paper size is changed, be sure to change the size
block.
If not, the paper size display lamp keeps indicating the previous
size.
4. Attach the tray.
Reverse the removing procedure of the tray. (Tilt upward and insert
the tray then push it into the machine.
5. Set paper, and change the paper size display.
Remove the paper size display plate, and insert it so that the selected
paper size is visible from the paper size display slit.
When A5 size is selected, set to "Special."
A3
B4
A4
B5
A4R
B5R
R R
A3 size B4 size
A4 size
Hole
B5 size
Special
Hole Hole
Hole Hole
Hole
Hole Hole
When the size is changed to A5, fit
the size block display to"Special."
A5 size
B5 size
A5 size
Hole
HoleHole
Hole
4 – 12
To Next Page
Loading...
