Sharp SF-7300 - Page 6

-.
.-
SF-7300
SF-7350
Drum;wer
Ho~i~ shaft
C-1. Installing the dmm
(In some of the machines,dependingon htirr, the drum has #
reedy been in~fled at the factory.Execute C-2 if b drum was im
statfedm the copier.)
(1) Push the time open lever to open the dam shell
mechankm.
(2) U uptfreleverto removethewastetoner container.
(3) Open the drum cover(one screw).
(4) Unfasten two connectorsand one scrw, and remove the
drum unit.
(8) Fasten twoconnectors.
C&e the drumcover.
Secure the drum unit~ twoscrews.
If the die~arge hmp mnnector was not corr~ed, th,
tmu~e sta~s cde “P% till be dbptayed when the power i:
turnedon.
(9) Chethe unit.
H* the waste tonercontainersensorphte down, and instal
the wastetoner container.
“/
(10) Instaflthe drum unhal~tfreguide inthec~.er.
2–3