Sharp SM-7700H

SPECIFICATIONS
SHARP
reserves
the
right
to
make
design
and
specification
changes
for
product
improvement
without
prior
notice.
m Compact disc stereo reciever
(SC-7700CDH
General
Power source: AC 220 V, 50 Hz
Power consumption: 40 W (with turntable)
Dimensions: Width; 430 mm (17°)
Height; 575 mm (22-2/3")
Depth; 332 mm (13-1/8")
Weight: 10 kg (22.0 Ibs.)
Tuner section
Frequency range: FM; 87.5-108 MHz
MW; 522-1,620 kHz
LW; 153-281 kHz
FM; 2 «V (40 kHz deviation, S/N 26dB)
MW/LW; 500 « V/m (with loop aerial)
Sensitivity:
Pre-amplifier section
Input sensitivity and input impedance:
AUX 1/AUX 2; 220 mV/47 kohms
PHONO; 110 mV/47 kohms
Output level and output impedance:
PRE OUT; 350 mV/47 kohms
Cassette deck section
Tape: Compact cassette tape
Bias and erasure system:
AC 100 kHz
Tape speed: 4.76 cm/sec (1-7/8 ips)
Wow and flutter: 0.17 % (DIN 45 511)
Heads: Playback; 1
: Record/playback; 1
Erase; 1
Motor: DC motor; 2
Compact disc player section
Signal readout: - Non-contact; semiconductor laser
Rotational speed: Approx. 200-500 rpm CLV
Error correction: CIRC (Cross Interleave Reed-Solomon
Code)
Audio channels: 2-channels
Quantization: 16-bit linear
D/A converter: 16-bit
Filter: 16-bit digital and LC low-pass
m= Stereo power amplifier (SM-7700H)
Power source: AC 220 V, 50 Hz
Power consumption: 550 W
Dimensions: Width; 430 mm (17°) ;
Height; 210 mm (8-5/16”")
Depth; 358 mm (14-1/8")
Weight: 11 kg (24.3 Ibs.)
Music power output: 2 x 250 W/8 ohms
Continuous power output:
2 x 130 W/8 ohms, 1.0% T.H.D., 1kHz
Input sensitivity and input impedance:
350 mV/47 k ohms
Speakers; 8 ohms
Headphones; 8-25 ohms.
Loaded impedance:
@ Stereo turntable (RP-7700H)
DC 12V
Width; 430 mm (17”)
Height; 97 mm (3-7/8”)
Depth; 345 mm (13-5/8”)
Power source:
Dimensions:
Weight: 2 kg (4.4 Ibs.)
Type: Belt drive semi automatic
Speed: 33-1/3 and 45 rpm
Motor: DC motor
Dynamic balanced straight tonearm with
magnetic cartridge
Replacement stylus: STY-155
Arm/cartridge:
IIIT