1
SMD2499FS
S11M442SMD249
CONVECTION MICROWAVE DRAWER MODEL
SERVICE MANUAL
TABLE OF CONTENTS
Page
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ..................... INSIDE FRONT COVER
BEFORE SERVICING ....................................................................................................... INSIDE FRONT COVER
WARNING TO SERVICE PERSONNEL ................................................................................................................. 3
MICROWAVE MEASUREMENT PROCEDURE ..................................................................................................... 4
FOREWORD AND WARNING ............................................................................................................................... 5
PRODUCT SPECIFICATIONS ............................................................................................................................... 6
SCHEMATICS ...................................................................................................................................................... 12
REMOTE CONNECTION PROBLEMS.................................................................................................................13
TROUBLE SHOOTING GUIDE.............................................................................................................................14
TEST PROCEDURES .......................................................................................................................................... 16
MICROWAVE DRAWER DISASSEMBLY ............................................................................................................. 27
WIRING DIAGRAMS ............................................................................................................................................ 41
PARTS LIST ......................................................................................................................................................... 43
PACKING AND ACCESSORIES .......................................................................................................................... 50
This document has been published to be used for after sales service only. The contents are subject to change without notice.
SHARP ELECTRONICS CORPORATION
SMD2499FS
In the interest of user-safety the unit should be restored to its original condition and only parts identical to those specified should
be used.
WARNING TO SERVICE PERSONNEL:
This service manual is intended for use by persons having electrical and mechanical training and a level
of knowledge of these subjects generally considered acceptable in the appliance repair trade. SHARP
ELECTRONICS CORPORATION cannot be responsible, nor assume any liability, for injury or damage of any
kind arising from the use of this manual.