2. Job Location Settings:
1) From the PGM2-PERSONNEL Sub-menu,
select "4. JOB LOCATE TBL" as shown in
Fig. 3-7.
FIG. 3-7
2) From the PGM2-JOB LOCATE TBL settings, the
following preset options are available:
a) Text : 8 char. max.
b) Salary Amount : pay rate per hour
c) Over-Time Rate : Percent rate to calculate overtime (ex: 1.50 is time-and-a-half)
*** Note:
Once you have completed the last field entry for the specified job location, the UP-3300
will return to the location listing automatically.
Once you have completed presetting all job location data, you can exit the PGM2 sub
menus by depressing the CANCEL until the UP-3300 returns to the HOME keyboard.
10
FIG. 3-8
To Next Page
Loading...
