1) From the Mode Main menu select the
"5. X2 MODE" simply by touching this option
as shown in Fig. 4-1.
FIG. 4-1
FIG. 4-2
FIG. 4-3
FIG. 4-4
2) From the X2-Mode Sub-Menu #1, select
"16. EMPLOYEE" by simply depressing
the report menu item as shown in Fig. 4-2.
3) Enter the desired employee code or range of
employee code(s) by using the ten key pad
followed by depression of the [ENTER]
function key as shown in Fig. 4-3..
13
4) Select "1. DISPLAY" to display the contents at
the UP-3300 receipt window or "2. REPORT
PRINTER to print the contents at the
designated report printer as shown in Fig. 4-4.
WEEK - 1 REPORT SEQUENCE
To Next Page
Loading...
