Sharp UP-3300 - Page 16

7) Select "1. DISPLAY" to display the contents at
the UP-3300 receipt window or "2. REPORT
PRINTER to print the contents at the
designated report printer as shown in Fig. 4-7.
*** Note:
Once the UP-3300 has successfully displayed/printed the report, it will return to the X2
mode automatically.
FIG. 4-5
FIG. 4-6
FIG. 4-7
5) From the X2-Mode Sub-Menu #1, select
"19. OVER TIME" by simply depressing
the report menu item as shown in Fig. 4-5.
6) Enter the desired employee code or range of
employee code(s) by using the ten key pad
followed by depression of the ENTER
function key as shown in Fig. 4-6.
14
*** Note:
Once the UP-3300 has successfully displayed/printed the report, it will return to the X2
mode automatically.