8) From the Mode Main Menu select the
"6. Z2 MODE" simply by touching this option
as shown in Fig. 4-8.
FIG. 4-8
FIG. 4-9
FIG. 4-10
FIG. 4-11
9) From the Z2-Mode Sub-Menu #1, select
"7. EMPLOYEE" by simply depressing
the report menu item as shown in Fig. 4-9.
10)Enter the desired employee code or range of
employee code(s) by using the ten key pad
followed by depression of the [ENTER]
function key as shown in Fig. 4-10.
15
11)Select "1. DISPLAY" to display the contents at
the UP-3300 receipt window or "2. REPORT
PRINTER to print the contents at the
designated report printer as shown in
Fig. 4-11.
To Next Page
Loading...
