4) Select "1. DISPLAY" to display the contents at
the UP-3300 receipt window or "2. REPORT
PRINTER" to print the contents at the
designated report printer as shown in Fig. 5-4.
FIG. 5-4
18
5) Once you have selected the display/printer
option, the UP-3300 will prompt:
"ARE YOU SURE ?"
as shown in Fig. 5-5.
FIG. 5-5
*** Important:
Please insure that the connected report printer is functioning properly prior to this selection.
*** Note:
Once the UP-3300 has successfully displayed/printed the report, it will return to the Z2
mode automatically.
To Next Page
Loading...
