06/2/24 WF-5000W(U)3.fm
E-19
TINSEA095AWZZ
Advanced Features
WF-5000W
ENGLISH
Timer and sleep operation (Remote control only) (continued)
Checking the timer setting in the timer stand-by mode:
Cancelling the timer setting in the timer stand-by mode:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the same set-
ting, perform the following operations.
Sleep operation
The radio and cassette tape can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by mode,
proceed as follows.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up to tape in
the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the tape and record radio
programmes whilst sleeping.
Caution:
When using the cassette deck, be sure the tape length is long enough to per-
form both functions. If you want to sleep and wake up listening to a tape, and
the length of the tape is shorter than the sleep timer setting, timer playback or
recording will not be possible.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or button to select "ONCE CAL" or
"DAILY CAL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the settings in
order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or button to select "ONCE OFF" or
"DAILY OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "ONCE" or
"DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or button to select "ONCE ON" or
"DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by mode.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to select "SLEEP", and
press the MEMORY button.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5 Press the MEMORY button.
"SLEEP" will appear.
6 The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation
finishes.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select "SLEEP X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by pressing
the MEMORY button (steps 4 - 5).
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2
Within 10 seconds, press the or button to select "SLEEP OFF",
and press the MEMORY button.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or recording (steps
2 - 10, pages 18).
Sleep timer setting
Timer playback or
recording setting
Sleep operation will
automatically stop.
Timer playback or recording
start time
End time
1 minute - 3 hours Desired time
To Next Page
Loading...
