Sharp XE-A147 - Page 40

38
Manual tax 1 through 4 system (Manual entry method using programmed percentages)
s t
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when the
t
key is pressed just
after the
s
key. After this calculation, you must finalize the transaction.
Automatic VAT 1 and tax 2 through 4
This system enables the calculation in the combination with automatic VAT 1 and tax 2 through 4. This
combination can be any of VAT 1 and tax 2 through 4. The tax amount is calculated automatically with the
percentages previously programmed for these taxes.
NOTE
 • ThetaxstatusofPLU/subdepartmentdependsonthetaxstatusofthedepartmentwhichthePLU/
subdepartmentbelongsto.
• VAT/taxassignmentsymbolcanbeprintedatthefixedrightpositionneartheamountonthereceiptas
follows:
VAT1/tax1 A
VAT2/tax2 B
VAT3/tax3
C
VAT4/tax4 D
 WhenthemultipleVAT/taxisassignedtoadepartmentoraPLU,asymbolofthelowestnumber
assignedtoVAT/taxratewillbeprinted.Forprogramming,pleasereferto“VariousFunctionSelection
Programming1”(Jobcode66)onpage56.
Example
Key operation Print
$
s
t
A
(When the manual
VAT 1 through 4
system is selected)