Sharp XE-A147 - Various Function Selection Programming 2

61
3 Various Function Selection Programming 2
The cash register provides various options so you can use the register to suit your sales needs.
In this section, you can program the following features (parameters within parentheses indicate default setting):
• Power save mode (entering the power save mode after 30 minutes)
• Logo message print format (Header 3-line message and footer 3-line message)
• Save SD function
• Thermal printer density (standard density)
■
Power save mode
s
10
@
ABC
As
To set “000”
To program another job code
Item: Selection: Entry:
A
Entering power save mode when time is displayed Yes* 0
No 1
BC
Time (minute) to entering power save mode since no
operation is made
00 to 99
(default 30)
(00: 100 minutes)
Example
Key operation Print
s
10
@
030
s A
■
Logo message print format
You can select the number of lines for your logo message, and the position to print it on receipt.
For details of the logo message type, please refer to “Logo messages” section on “Text Programming”.
A
s
To set “0”
s @
A
11
To program another job code
A: Logo message type
0: Header 3-line message without graphic logo
1: Graphic logo only
2: Graphic logo and footer 3-line message
3: Header 6-line message
4: Graphic logo and header 3-line message
5: Header 3-line message and footer 3-line message (default*)
Example
Key operation Print
s
11
@
3
s A