Sharp XE-A147 - Computation of VAT (Value Added Tax);Tax

37
■
Mixed-tender sale
Example
Key operation Print
s
950
A
c
NOTE
 Pressthe
C
keyinplaceofthe
A
keywhenyourcustomermakespaymentbycheques.
7 Computation of VAT (Value Added Tax)/Tax
■
VAT/tax system
The cash register may be programmed for the following six VAT/tax systems. The cash register is
preprogrammed as automatic VAT 1-4 system.
Automatic VAT 1 through 4 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by using
the corresponding programmed percentages.
Automatic tax 1 through 4 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals by using
the corresponding programmed percentages, and also adds the calculated taxes to those subtotals, respectively.
Manual VAT 1 through 4 system (Manual entry method using programmed percentages)
s t
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This
calculation is performed using the corresponding programmed percentages when the
t
key is pressed just
after the
s
key.
Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)
s t
VAT rate
To use a programmed rate
This system enables the VAT calculation for the subtotal. This calculation is performed using the VAT 1 preset
percentages when the
t
key is pressed just after the
s
key. For this system, the keyed-in tax rate can
be used.