35
Creating Logo Data
This sample operation will demonstrate a procedure below, using the Customer Support Tool and Paint, a
Microsoft Windows component:
Note
Other tools then Paint may be used for logo file creation. The logo file must meet the requirements
defined in the LOGO section of this manual.
(1) Creating logo data for your header logo
(2) Writing the logo data to an SD memory card
For details of the operation, refer to each section or online help of Paint.
Note
In Paint of Windows 7, appearance of screens or functions is different from that of previous versions.
You cannot create logo data with the procedure below using Paint of Windows XP or Windows Vista.
If you are using Windows XP or Windows Vista, to create logo data please refer to the online help of
each version.
1. Insert an SD memory card into an SD memory card slot of your computer.
2. Open the “logo” folder in the A207 folder, which has been created after
decompression.
3. Select Blank(.bmp), right-click [Open with], and select “Paint.”
Paint starts, and Blank(.bmp) is open.
2
3
To Next Page
Loading...
