Sharp XE-A217B - Function Selection

92

■
FunctionSelection
Your register enables you to select various functional selections.
Procedure
Program each item as follows:
The screen continues.
•LV.SFTMODE(Usetheselectiveentry)forXE-A217W/XE-
A217Bonly
PUBLIC: Allowed in the REG mode and the Manager mode.
LIMITED: Allowed only in the Manager mode.
•LV.SFTTYPE(Usetheselectiveentry)forXE-A217W/XE-
A217Bonly
AUTO: Automatic return mode
MANUAL: Lock shift mode
•RETURNTOL1(Usetheselectiveentry)forXE-A217W/XE-
A217Bonly
When the PLU level shift system is set to “AUTO,” the PLU
level can be returned to level 1 by one of the following
methods:
BY ITEM: Returns the PLU level to level 1 by one item.
RECEIPT: Returns the PLU level to level 1 by one receipt.
•GLU#ENTRY(Usetheselectiveentry)forXE-A217W/XE-
A217Bonly
AUTO: Assign GLU code in an automatic serial number
MANUAL: Require manual GUL code entry
•GLUCLKCHECK(Usetheselectiveentry)forXE-A217W/XE-A217Bonly
Checking of the clerk, when GLU reorder is made.
YES: Enable to check of the clerk
NO: No checking
•SPLITCOUNT(Usetheselectiveentry)
Count method of split pricing entry.
PACKAGE: Unit of the package
QUANTITY: Quantity
•CRINRA/PO(Usetheselectiveentry)
Credit totalizer update if RA or PO nalization by the credit key.
NON: Not update
UPDATE: Update
•VDMODETOHOURLY(Usetheselectiveentry)
YES: Enable to add to the hourly total in void mode.
NO: Disable to add to the hourly total in void mode.
•STBEFOREDIRECT(Usetheselectiveentry)
Subtotal entry before direct non-tendering nalization
MUST: Require entry of subtotal for the non-tendering nalization
NOT: Not to require entry of subtotal for the non-tendering nalization
•STBEFORETEND(Usetheselectiveentry)
Subtotal entry before tender
MUST: Require entry of subtotal for the tendering nalization
NOT: Not to require entry of subtotal for the tendering nalization
•NSRECEIPT(Usetheselectiveentry)
Printing the receipt at the time of No Sale
PRINT: Print the receipt
NOT: Not to print the receipt