Sharp XE-A301

46
Other programming
Job code: 61
* Item: Selection: Entry:
A Always enter 0. 0
B Always enter 0. 0
C Negative dept. and PLU/subdept. Disable 0
Enable* 1
D Fractional treatment Round off (4 down, 5 up)* 0
Raising to unit 1
Disregarding fractional treatment 2
E Use of
:
key As 00 key* 0
As 000 key 1
F Time format 12-hour format 0
24-hour format* 1
G Date format Use month-day-year format 0
Use day-month-year format* 1
Use year-month-day format 2
H Position of decimal point (from right) (TAB) 0 to 3 (default: 2)
Job code: 62
* Item: Selection: Entry:
A Always enter 0. 0
B Error beep for misoperation Lock error 0
Misoperation* 1
C Key catch sound Yes* 0
No 1
D Buffered keyboard Yes* 0
No 1
E Void mode Enable* 0
Disable 1
F Printing of void mode in X2/Z2 report Yes* 0
No 1
G Printing of void mode in X1/Z1 report Yes* 0
No 1
H Addition to the hourly total in VOID mode No* 0
Yes 1
Job code: 63
* Item: Selection: Entry:
A Receipting at the time of “no sale” entry Yes* 0
No 1
B No sale after non-add code entry Disable 0
Enable* 1
C Non-add code entry Enable* 0
Disable 1
D Copy receipt No* 0
Yes 1
E Entry that causes the merchandise Enable* 0
subtotal to be smaller than zero Disable 1
F Subtotal entry before tendering Noncompulsory* 0
Compulsory 1
G Subtotal entry before direct non-tender Noncompulsory* 0
finalization Compulsory 1
H Direct non-tender finalization after Disable 0
tendering Enable* 1
A301_3(En) 03.4.24 7:40 PM Page 46