Sharp XE-A301

55
Date setting for EURO modification operation
• In case you changed the date format using job code 61, follow the format you selected for setting
the date.
• If all zeros are set, this programming is disabled.
• If you have already made the Job #800 operation with the substitution of 3 for “A” in the X2/Z2
mode, this programming is disabled.
Time setting for EURO modification operation
• If you have already made the Job #800 operation with the substitution of 3 for “A” in the X2/Z2
mode, this programming is disabled.
s
14
@
10
s
A
PrintKey operation example
s@14 s A
Time (Hour) (00-23)
s
13
@
01072005
s
A
PrintKey operation example
s@13 s A
Date (Day-Month-Year)
(seven or eight digits)
To set all zeros
A301_4(En) 03.4.24 7:42 PM Page 55