Sharp XE-A303

PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Entering A Basic Sale
Insert the operator key into the mode lock and turn to the REG position.
The cash register has forty department buttons in white through which to
enter your sales. The purpose of these are to assist you in analysing your business.
(For example, department 1 could be used for food sales and department 2 for non food sales etc).
By allocating goods to the appropriate department buttons you are preparing and organising sales
data for the end of day reports.
• Insert the OP key and turn the mode lock to REG position ready for normal use.
• Enter the price of the goods without the decimal point then press one of the Department buttons.
• To enter another sale repeat as above by entering a price then a Department.
• Press #/TM/ST button to show the amount due.
• To calculate the change enter the money given by customer.
• For example £5.00 is entered as .
• Press the payment key TL/NS . The amount of change due will be shown on the display.
7
500
PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Programming A Department Price and Department Name
8
PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Programming A Receipt Message
9
• Insert the manager (MA) key into the Mode Lock and turn to the PGM position
For example to program department 1 as FOOD
• Ensure the Mode Lock is at PGM.
• Press then press the key.
• Type in FOOD using the letters on the keyboard.
• Press the key followed by TL/NS to finalise.
Dept. Key
Enter
Item Name
(Max. 16 char.)
Press
Enter
Price
(Leave blank if no
price is required)
Press
TL/NS
#/TM/ST
#/TM/ST
#/TM/ST
4
4
1
2
3
Insert the manager (MA) key into the Mode Lock and turn to the PGM position.
For example to program a message.
• Ensure the Mode Lock is at PGM.
• Press followed by .
• Press (for line) followed by .
• Type in your 24 character max. message and press .
• Press (for line 2) followed by .
• Type in your 24 character max. message and press .
• Press (for line 3) followed by .
• Type in your 24 character max. message and press .
• Press at any stage to finalise.
• Return to the REG position.
Enter line
number
(1-3 as standard,
upto 6 lines optional).
24 character
message
TL/NS
TL/NS
#/TM/ST
#/TM/ST
#/TM/ST
#/TM/ST
#/TM/ST
00
00
1
21