TL/NS
TL/NS
PGM
MGROPX/Z
REG
X2/Z2
X1/Z1
Mode Lock
Reporting
10
The cash register has two reporting types. Use the reading function (X) when
you need to take a reading of sales information entered since the last reset.
This reading can be taken any number of times without clearing totals.
Use the resetting function (Z) when you need to clear the registers memory.
The reports can be taken in the X1/Z1 mode for daily sales or X2/Z2 for periodic
(monthly) reports. For further information please refer to the instruction manual.
Example Daily Reports
• Insert the manager (MA) key and turn to X1/Z1.
• To read press .
• To reset press .
• Return to REG position once the report has finished.
Common Error Messages
!
Error Message Error Status Action
ENTRY ERROR Registration error Make a correct key entry
MISOPERATION Misoperation error Make a correct key entry
SBTL COMPUL Compulsory depression of the Press the key and continue the
key for direct finalisation operation
TEND COMPUL. Compulsory tendering Make a tendering operation
NOT ASSIGNED No entry of a clerk code Make a clerk code entry
OVER LIMIT. Overflow limitation error Make a registration within a limit of entry
INH. OPEN PR The open price entry is inhibited Make a preset price entry
INH UNIT PR The preset price entry is inhibited Make an open price entry
NOT NON-TEND The direct finalisation is inhibited Make a tendering operation
BUFFER FULL Subtotal void is not allowed Finalise the transaction, and correct the
wrong entries in the mode
HEAD UP Print roller arm is lifted up Make sure the print roller arm is securely locked
PAPER EMPTY Receipt or journal paper roll is not Install receipt or journal paper
installed or empty
CLERK ERR. Overlapped clerk error Complete the overlapped transaction under way
#/TM/ST #/TM/ST
To Previous Page
Loading...
