Sharp XE-A307 - Page 15

XE-A207/A217/A307 INSTALL
– 13 –
(11) INSTALLING A PAPER ROLL (XE-A307)
The register can print receipts and journals. For the printer, you must
install the paper rolls (receipt and journal paper rolls) provided with the
register.
1) Remove the printer cover.
2) Lift up the print roller arm of the receipt side.
3) Set a paper roll in the paper roll cradle of the receipt side as per the
diagram.
4) Feed the end of the paper along with the paper positioning guides
as per the diagram.
5) While holding down the paper, slowly close the print roller arm of
the receipt side, and push down the arm until you hear a click lock-
ing the arm.
Note: If the print roller arm is not securely locked, printing is not done
right. If this problem occurs, open the arm, and close the arm
instructed above.
Print roller arm
To the printer To the printer
Correct Incorrect
Paper positioning
guides