Sharp XG-MB70X User Manual

-19
Setup
Setting up the Projector
Position the projector perpendicular to the screen with the projector’s feet flat and level to achieve an
optimal image.
Note
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through
the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling
directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights
when setting up the projector in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according to the desired picture size. (For
details, refer to page 2 of the “SETUP GUIDE” contained on the supplied CD-ROM.)
Setting up the Projector
300"
200"
100"
84"
60"
240"
´
180"
Projection Distance
160"
´
120"
80"
´
60"
67"
´
50"
48"
´
36"
29'9
"
–
44'9
"
(9.1 m – 13.7 m)
19'10
"–
29'10
"
(6.0 m
–
9.1 m)
9'11
"–
14'11
"
(3.0 m
–
4.6 m)
8'4
"–
12'6
"
(2.5 m
–
3.8 m)
5'11
"–
8'11
"
(1.8 m – 2.7 m)
Picture Size
Indication of the Projection Image Size and Projection Distance
For details, refer to page 2 of the “SETUP GUIDE” contained on the supplied CD-ROM.
Example : NORMAL Mode (4:3)
XG-MB70X_E_P18_20.p65 2004.8.6, 11:57 AM19

Sharp XG-MB70X Specifications

General

Brand	Sharp
Model	XG-MB70X
Category	Projector
Language	English