Sharp XG-MB70X - Auto Sync Adjustment; Checking the Input Signal

-49
Useful Features
Auto Sync Adjustment
Used to automatically adjust a computer image.
Menu operation Page 42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Adjustment
Note
• Auto Sync adjustment is also performed by
pressing
on the projector or on the re-
mote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 31.)
Checking the Input Signal
Menu operation Page 42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• The projector will display the number of scanned
lines available from audio-visual equipment
such as a DVD player or Digital Video.
• The projector will display the resolution when
connecting the computer.
Selectable items
(ON)
(OFF)
Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
cally performed.
XG-MB70X_E_P40_49.p65 2004.8.6, 0:00 PM49