-46
Switching the High Bright-
ness/High Contrast Mode
This function changes the brightness and con-
trast of the projected image. It can be operated
using the IRIS button on the remote control.
Menu operation Page 42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of IRIS Settings
Selectable items
High Brightness
High Contrast
Description
High brightness is given priority over
high contrast.
High contrast is given priority over high
brightness.
Picture Adjustment (“Picture” menu)
sRGB Setting
When you want to display the image in a natural
tint based on an original image from the com-
puter, select “sRGB” and set it to “
” (ON).
Menu operation Page 42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Note
•
An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the images are displayed in a
natural tint based on an original image, when
“sRGB” is set to “
” (ON).
• You cannot set the items, “Red”, “Blue”, “CLR
Temp”, “Bright Boost” on the “Picture” menu,
when “sRGB” is set to “ ” (ON).
• For additional information about the sRGB func-
tion, visit “http://www.srgb.com/”.
Info
• When “sRGB” is set to “ ” (ON), the projected
image may become dark, but this does not indi-
cate a malfunction.
XG-MB70X_E_P40_49.p65 2004.8.6, 0:00 PM46
To Next Page
Loading...
Need help?
General
