51
Useful
Features
Speaker
Audio Input
Audio1
Audio Out
Treble
Bass
FAO
0
0
On
SEL./ADJ.
RETURN
ENTER
END
Picture Audio SIG SCR PRJ Net.
1
Speaker Settin
g
This function allows you to set the audio
output of the internal speaker to “On” or “Off”
such as when the projector is connected to an
external amplifi er.
Selectable
items
Description
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.
2
Audio Input
This function allows you to select an
appropriate combination of audio input
terminals for each input mode.
Selectable
items
Description
Audio 1 The AUDIO 1 input terminal is used as
an audio input terminal
Audio 2 The AUDIO 2 input terminal is used as
an audio input terminal.
HDMI HDMI terminal is used as an audio
input terminal. (This item is available
with HDMI input.)
3
Audio Output Type Setting
This function determines whether the audio
level output from the AUDIO output terminal is
fi xed or variable by linking with VOLUME.
Selectable
items
Description
FAO
(Fixed Audio
Output)
Audio output that does not vary in
strength with the volume level of
the source projector.
VAO
(Variable Audio
Output)
Audio output that varies in strength
with the volume level of the source
projector.
Info
When “Audio Out” has been set to “VAO”, fi rst
make sure to lower the volume of the projector
before turning the power on or off and when
switching the input.
•
4
Adjusting the Audio
This function allows you to adjust the
projector’s audio.
Selectable
items
O button Q button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Audio Adjustment (“Audio” Menu)
Menu operation n Page 46
To Next Page
Loading...
Need help?
General
