Sharp XL-30H - SPECIFICATIONS; General and Amplifier Specifications

XL-30H/30W
– 4 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
SPECIFICATIONS
XL-30H/30W
Specifications for this model are subject to change without
prior notice.
● Cassette deck section
Frequency response: 50 - 14,000 Hz (Normal tape)
Signal/noise ratio: 50 dB
Wow and flutter:
(XL-30H for Europe)
0.3 % (DIN 45 511)
Type: Full range speaker system
Speakers: 10 cm (4") full-range speaker
Rated input power:
5 W
Maximum input power:
10 W
Impedance: 4 ohms
Dimensions: Width; 145 mm (5-3/4")
Height; 240 mm (9-1/2")
Depth; 191 mm (7-1/2")
Weight: 1.3 kg (2.9 lbs.)/each
● General
Power source:
(For XL-30H)
AC 230 V, 50 Hz
Power consump-
tion: (For XL-30H)
Power consump-
tion: (For XL-30W)
28 W
26 W
Dimensions:
Width; 160 mm (6-5/16")
Height; 241 mm (9-1/2")
Depth; 249 mm (9-13/16")
Weight:
2.7 kg (6.0 lbs.)
● Amplifier section
Output power:
(XL-30H for Europe)
PMPO; 28 W (total)
MPO; 14 W (7 W + 7 W)
(DIN 45 324)
RMS; 10 W (5 W + 5 W)
(DIN 45 324)
Output terminals:
Speakers; 4 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
● Tuner section
Frequency range:
(For XL-30H)
FM; 87.5-108 MHz
AM; 522-1,620 kHz
● Compact disc player section
Type: Compact disc player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
D/A converter: 1-bit D/A converter
Filter: 8-times oversampling digital
filter
Frequency response:
20 - 20,000 Hz
Wow and flutter: Unmeasurable
(less than 0.001% W. peak)
Output power:
(XL-30H for U.K.)
RMS; 10 W (5 W + 5 W)
(10 % T.H.D.)
Wow and flutter:
(XL-30H for U.K./XL-30W)
0.25 % (WRMS)
Power source:
(For XL-30W)
AC 110 - 127/220 - 240 V,
50/60 Hz
Output power:
(For XL-30W)
MPO; 14 W (7 W + 7 W)
(10 % T.H.D.)
RMS; 10 W (5 W + 5 W)
(10 % T.H.D.)
Frequency range:
(For XL-30W)
FM; 88-108 MHz
AM; 531-1,602 kHz
CP-XL40H