24
3
2
4
(Continued)
5 When a programme of the type specified starts
on an ON (other network) station, the unit will
automatically switch to the station broadcasting
the selected programme type, and “PTY” will
flash.
6 When the programme specified for the ON sta-
tion is over, the unit will automatically return to
the original station you were tuned to.
Note:
● If the EON button is pressed when “EON” is not
displayed, “NO EON” will appear for 4 seconds
to indicate that the unit cannot enter the EON
stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON
button.
(“Programme type” →“WAITING”)
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON
button. Within 4 seconds, press it again. The EON
stand-by mode will be cancelled.
● “PTY” will go out.
■ EON-PTY
1 Tune in the desired RDS station (when a station
name is being displayed).
2 Press the EON button when “EON” appears.
● “PTY TI” will flash for about 4 seconds.
3 Whilst they are being displayed, select the de-
sired programme type by turning the jog dial.
● The selected programme type will flash.
4 Within 4 seconds, press the PTY.TI SEARCH
button.
● The programme type and “WAITING” will be dis-
played for 2 seconds each.
● “PTY” will appear, and the unit will enter the
EON-PTY stand-by mode.
*60H/70H(SUK)23-27 00.1.5, 11:41 AM24
To Next Page
Loading...
