Sharp XL-HP700 - Page 27

XL-HP700
• Subwoofer connection
When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasized bass.
Connect
an RCA cord from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT jack.
Speaker with a
built-in amplifier
SUB i)
WOOFER
PRE-OUT ~
~I~
~
• To record on a tape
1 Insert a cassette in the cassette compartment.
2 Press the VIDEO/AUX button.
3 Press the e .. button.
4 Press the ~ I c: (~) or ...... button.
S Play the VCR, DVD, etc.
• Headphones
• Before plugging in or unplugging the headphones, reduce the
volume.
• Be sure your headphones have a 1/8
11
(3.5 mm) diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance
is 32 ohms.
• Plugging
in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
27