Sharp XL-HP700

XL-HP700
Maintenance
Specifications
• Cleaning the tape-handling parts
• Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
• When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
• General
• Amplifier
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values
in individual units.
Power source AC 120 V, 60 Hz
Power
176 W
consumption
Dimensions
Width: 8-1/8" (205 mm)
Height: 10-1/4" (260 mm)
Depth: 14-7/16" (366 mm)
Weight 16.8 lbs. (7.6 kg)
Output power 100 watts minimum RMS per channel into 6
ohms from 60 Hz to 20 kHz, 10
%
total har-
monic distortion
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer pre-out (audio signal): 200 mV/
10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal): 500 mV/47 k
ohms
© Erase head
@ Recording/Playback head
® Pinch roller
@ Capstan
• After long use, the deck's heads and capstans may become mag-
netized, causing poor sound. Demagnetize these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetizer. Read· the demagnetizer's instructions
carefully before use.
• Cleaning the CD pickup lens
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be per-
formed periodically. Lens cleaners are commercially available. Con-
tact your local CD software dealer for options.
• Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
• Do not use chemicals for cleaning (gasoline, paint thinner, etc.).
It may damage the cabinet finish.
• Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
30