Sharp XL-HP700 - Timer and Sleep Operation

XL-HP700 Timer and sleep operation
Load a cassette for recording in the cassette
compartment.
1 Press the ON/STAND-BY button to turn the power on.
'\ 1/ I
_
'-_' '_1/1_----:::.... ...... ,.......:1 -:::,../--:1.=' -=--1 '=--/ __ ~0It
,--" I -:-IC'["IU
/ 1'\
Red
'\ 1/
-
'-_' '_1/1_----:::.... ...... ,.......:' -:::,../--:1.=' -=--1 '=--, __ ~;01!'t
,--, , I-=-' C -I_I U :r
/ I'
White
4 Press the TIMER/SLEEP button repeatedly to select timer
playback or timer recording.
Display the white
II~II for timer playback and the red II~II for
timer recording.
3 Adjust the volume using the VOLUME control.
Do not turn the volume up too high.
2 Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
To select the timer playback source: CD, TUNER (BAND) or
TAPE.
To select the timer recording source: TUNER (BAND).
When you select the TUNER (BAND), tune into the desired
station.
Press the CLOCK button to check that the clock is set to the cor-
rect time.
2 For timer play- Load a cassette or discs to be played.
back:
For timer re-
cording:
• Timer playback or timer recording
Before setting timer:
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at
the preset time.
24