EasyManua.ls Logo

Sharp XL-HP700

Sharp XL-HP700
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
XL-HP700
Caution:
This operation will erase all data stored
in
memory including clock,
timer settings, tuner preset, and CD program.
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 While pressing down the
~
/
c:
button and the X-BASS/DEMO
button, press the ON/STAND-BY button until "CLEAR AL"
appears.
,-"
r-,,_
,-,
,-,-,
,-,
,_ ,_
c:::
r-,
r,
o
X-BASS
IDEMD
o
POWER
ONI
STAND-BY
Condensation
Sudden temperature changes, storage or operation
in
an
extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or
on
the transmitter
on
the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power
on
with
no
disc (or cassette)
in
the unit until normal
playback
is
possible (about 1 hour). Wipe off any condensation
on
the transmitter with a soft cloth before operating the unit.
Before transporting the unit
Remove all CDs from the unit. Your
unit checks whether there are any
discs inside the unit when the tray
is
closed. "NO DISC" appears if no
disc
is
left. Then, set the unit to the
power stand-by mode. Carrying the
unit with discs left inside can dam-
age the unit.
Remote control
If trouble occurs
When this product
is
subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it
is
operated incorrectly, it may
malfunction.
Note:
If
neither operation above restores the unit, clear all the memory by
resetting
it.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power
on
again.
2 If the unit is not restored
in
the previous operation, unplug and
plug
in
the unit, and then turn the power
on.
Symptom
Possible cause
The remote control does
Is
the AC power cord of the unit
not operate.
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incor-
rect?
Does the remote control sensor
receive strong light?
29

Other manuals for Sharp XL-HP700

Related product manuals