25
XL-UH2080H
Advanced Features
To recall a memorised station
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
To erase entire preset memory
Using t
he Radio Data System (RDS)
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their sta-
tion names, and information about the type of programme such
as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will be
displayed.
“TP” (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and “TA” (Traffic
Announcement) will appear whilst a traffic information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
You can control the RDS by using the buttons on the remote
control only.
Press the PRESET
( or ) button for less than 0.5 seconds to
select the desired station.
1
Press the PRESET
( or )
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET
( or ) button again when the desired
station is located.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the button, press the TUNER (BAND)
button until “TUNER CLEAR” appears.
To Next Page
Loading...
Need help?
General
